FAQ
Sales & Support
- Q1Please provide more information on the termination of the unused pins of S1D13A05 in case of using under CPU interface mode Generic #2.
- Q2Is it possible to connect the product to the Renesas SH-2?
- Q3Is it possible to use the product with the LCD panel rotated?
- Q4When using a single CPU read signal in Generic #1, which should I connect it to - RD# or RD/WR#?
- Q5Can you provide an instruction manual on USB?
- Q6Do you offer an IBIS model?
- Q7Do you offer an evaluation board?
- Q8Who do I contact in the event the product fails to operate normally?
- Q9How much power does this device consume?
- Q1Please provide more information on the termination of the unused pins of S1D13A05 in case of using under CPU interface mode Generic #2.
- ALeave any unused output pin, DRDY, PWMOUT, IRQ, GPO[10:0] or USBOSCO, not connected.
Terminate the unused input pins as indicated in the spec. If there is no indication in the spec, terminate the pins as shown below.WAIT# Pull down or pull high by 1kΩ CLKI2 Pull down by 1kΩ GPIO0 to GPIO7 Pull down by 1kΩ - Q2Is it possible to connect the product to the Renesas SH-2?
- AS1D13A05 and SH-2 can be connected directly via the bus.
The technical manual treats the interface with SH-2 as Generic #1. It does not describe the SH-2 interface.
Here, connect the BS# signal to IOVDD. - Q3Is it possible to use the product with the LCD panel rotated?
- AThe SwivelView function provides a rotated view.
It supports views rotated by 90 degrees, 180 degrees, and 270 degrees. - Q4When using a single CPU read signal in Generic #1, which should I connect it to - RD# or RD/WR#?
- AConnect to both RD# and RD/WR#.
All read operations will be 16-bit only. 8-bit read operations will not be supported. - Q5Can you provide an instruction manual on USB?
- ARefer to the attached documents.
USBFC (USB Function Controller) EIFUFAL501 user's manual
(437KB) - Q6Do you offer an IBIS model?
- ARefer to the attached documents.
S1D13A05 IBIS model
(101KB) - Q7Do you offer related software or device drivers?
- ARelated software and device drivers are available at the URL below.
- Q8Who do I contact in the event the product fails to operate normally?
- APlease contact your local Seiko Epson representative available at the Sales & Support page.
- Q9How much power does this device consume?
- APower consumption varies with operating conditions. Refer to the reference material provided as follows, which shows power consumption figures under typical operating conditions.
