Inertial Measurement Unit (IMU) : M-G364

Features List of M-G364

Product Name		M-G364
Small Size, Light Weight		24 x 24 x 10 mm, 10grams
Low Noise, High Stability	Gyro Bias Instability	2.2°/hr
	Angular Random Walk	0.09°/√hr
6 Degree Of Freedom	Triple Gyroscopes	±100 °/sec, ±200 °/sec*1
	Tri-Axis Accelerometer	±3G
Data Resolution		16 / 32bit
Digital Serial Interface		SPI / UART
Factory-Calibrated Stability		Bias, Scale Factor & Axial alignment
Data Output Rate		to 2kSps
Calibration Temperature Range		-40°C to +85°C
Operating Temperature Range		-40°C to +85°C
Low Power Consumption		18mA (Typ.) @ 3.3V
Features		External Trigger Input

^*1 The gyro dynamic range is determined by part number ordering code

• Vibration stabilization of cameras, antennas and other stabilizing systems
• Attitude control of unmanned aircraft and unmanned systems (e.g., unmanned aerial, underwater and ground vehicles)
• Motion measurement of ships, automobiles, and other large machinery
• Measurement and control of vibration and attitude of industrial machinery and equipment

Gyro Allan Variance Characteristic

Accelerometer Allan Variance Characteristic

Gyro Allan Variance Characteristic

Accelerometer Allan Variance Characteristic

M-G364 Brief Sheet (240KB)

Epson prepares 2 types of IMU evaluation Support for easy installation in customer's evaluation environment.

For PC/Logger Evaluation

USB Evaluation Cable (M-C30EV041) Data sheet (215KB)

USB Evaluation Cable Interface / Breakout Board (M-G32EV031) Data sheet (390KB)

For User System Evaluation

USB Evaluation Cable Interface / Breakout Board (M-G32EV031) Data sheet (390KB)

For the Evaluation at PC, EPSON prepare "Logger Software" for quick and easy evaluation.
For "Logger Software", please visit our Evaluation Tools website.

For more technical information on IMU:M-G364, please see our Contact page.

• NewsPress Release New IMUs; M-G365, M-G370
  (April 3, 2018)
• InfoIMU M-G365 Product page Added
  (April 3, 2018)
• InfoIMU M-G370 Product page Added
  (April 3, 2018)
• InfoWe exhibit and demonstrate its IMUs and Accelerometers at the Epson booth at "AUVSI Xponential 2018" at Colorado Convention Center, CO., USA, May 1-May 3, 2018.
  Booth #3108
  Event Information: http://www.xponential.org/xponential2018/public/enter.aspx
  (March 30, 2018)
• InfoWe exhibit and demonstrate its IMUs and Accelerometers at the Epson booth at "SPIE DCS 2018" at Gaylord Palms Resort & Convention Center, FL., USA, April 17-April 19, 2018.
  Booth #518
  Event Information: https://spie.org/conferences-and-exhibitions/defense--commercial-sensing?SSO=1
  (March 30, 2018)

For further information on this site, please contact an Epson sales representative in your region. Please see contact page.