Inertial Measurement Unit (IMU) : M-G362
Not Recommended for New Design
IMU, designed specifically for customers with applications requiring higher sensitivity and accuracy
High Performance! (3dph)
|Small Size, Light Weight||24 x 24 x 10 mm, 7grams|
|Low Noise, High Stability||Gyro Bias Instability||3°/hr|
|Angular Random Walk||0.1°/√hr|
|6 Degree Of Freedom||Triple Gyroscopes||±150 °/sec|
|Data Resolution||16 / 32bit|
|Digital Serial Interface||SPI / UART|
|Factory-Calibrated Stability||Bias, Scale Factor & Axial alignment|
|Data Output Rate||to 2kSps|
|Calibration Temperature Range||-20°C to +70°C|
|Operating Temperature Range||-40°C to +85°C|
|Low Power Consumption||30mA (Typ.) @ 3.3V|
|Features||External trigger input, counter reset, etc.|
- Vibration stabilization of cameras, antennas and other stabilizing systems
- Attitude control of unmanned aircraft and unmanned systems (e.g., unmanned aerial, underwater and ground vehicles)
- Motion measurement of ships, automobiles, and other large machinery
- Measurement and control of vibration and attitude of industrial machinery and equipment
Typical Performance Characteristics
Gyro Allan Variance Characteristic
Accelerometer Allan Variance Characteristic
Evaluation Board Document
Epson prepares 2 types of IMU evaluation Support for easy installation in customer's evaluation environment.
With these evaluation tools, customer can pursue initial evaluation at PC or in the customer's existing system very quickly and easily.
For PC/Logger Evaluation
For User System Evaluation
Evaluation PCB (M-G35EV010) Data sheet (280KB)
For the Evaluation at PC, EPSON prepare "Logger Software" for quick and easy evaluation.
For "Logger Software", please visit our Evaluation Tools website.
For more technical information on IMU:M-G362, please see our Contact page.
News & Events
InfoThe article "Development of a High-Sensitivity Wireless Accelerometer for Structural Health Monitoring" has been published, using EPSON’s high performance Accelerometers, M-A351.
(January 18, 2018)
InfoWe exhibit and demonstrate its IMUs and Accelerometers at the Epson booth at "Bridge & Tunnel Technology Japan 2017", November 29-December 1, 2017.
Hall 8, Booth No. C-24
Event Information: http://www.infratech-expo.jp/
(November 29, 2017)
InfoNew Product Catalogue released (2.1MB)
(November 29, 2017)
InfoM-A351 Data sheet is updated
(November 9, 2017)
InfoM-V340 Data sheet is updated
(September 6, 2017)
For further information on this site, please contact an Epson sales representative in your region. Please see contact page.