S1C17W34/W35/S1C17W36 LCD32B Sample Software Copyright(C) SEIKO EPSON CORPORATION 2016. All rights reserved. History - 14 Dec, 2015 rev1.0.0 Newly developed. - 19 Jan, 2016 rev1.0.1 Change GNU17v3 project file. - 08 Jul, 2016 rev1.1.0 Change CPU and RTCA2 header files. ------------------------------------------------------------------------------ 1. Folder Configuration s1c17w34_w35_w36_lcd32b_sample |_ s1c17w34_w35_w36_lcd32b_gnu17v2 Sample project for GNU17v2 |_ s1c17w34_w35_w36_lcd32b_gnu17v3 Sample project for GNU17v3 2. Sample Software Specification This sample software executes the processing shown below using the LCD32B driver embedded in the microcontroller. - Turns all LCD segments on and off by way of normal display control - Turns all LCD segments on and off by way of "All on" and "All off" control - Turns all LCD segments off by way of "Display off" control 3. Hardware Requirements See technical manual of the microcontroller on connection between the microcontroller and LCD panel. 4. Behavior 1) All the LCD segments go on by way of normal display control in three seconds after the sample program is executed. 2) All the LCD segments go off by way of normal display control in three seconds. 3) All the LCD segments go on by way of "All on" control in three seconds. 4) All the LCD segments go off by way of "All off" control in three seconds. 5) All the LCD segments go on by way of "All on" control in three seconds. 6) All the LCD segments go off by way of "Display off" control in three seconds. 5. Adjustment This sample software includes GNU17v2.x and GNU17v3.x source code. Before using the sample software, follow instructions below to adjust the sample software either to GNU17v2.x or GNU17v3.x used. 1)Open Import Wizard to import this sample program into workspace. [File] > [Import] > [General] > [Existing Projects into Workspace] 2)Select the folder containing the sample program. For GNU17v2.x, select "s1c17w34_w35_w36_lcd32b_gnu17v2" project. For GNU17v3.x, select "s1c17w34_w35_w36_lcd32b_gnu17v3" project. 4)Check "Copy projects into workspace" and click "Finish" to import. Before using the sample software, follow instructions below to adjust the sample software either to S1C17W34, S1C17W35 or S1C17W36 used. 1) Select target CPU, which is in one of property when [Properties] is selected from project of the sample software. 2) Set the Debugger Startup Commands for the microcontroller on [GNU17 GDB Commands] dialog box, which is one of the property lists. Click [Create commands from template], select ICDmini for [Debugger], and [Overwrite] the command file for GNU17v2.x. As to configurations on GNU17 in detail, refer to S5U1C17001C Manual. EOF