S1C17W13 LCD4A Sample Software Copyright(C) SEIKO EPSON CORPORATION 2016. All rights reserved. History - 14 Dec, 2015 rev1.0.0 Newly developed. - 19 Jan, 2016 rev1.0.1 Change GNU17v3 project file. - 02 Aug, 2016 rev1.1.0 Change GNU17v3 project file. ------------------------------------------------------------------------------ 1. Folder Configuration s1c17w13_clg_sample |_ s1c17w13_lcd4a_gnu17v2 Sample project for GNU17v2 |_ s1c17w13_lcd4a_gnu17v3 Sample project for GNU17v3 2. Sample Software Specification This sample software executes the processing shown below using the LCD4A driver embedded in the microcontroller. - Turns all LCD segments on and off by way of normal display control - Turns all LCD segments on and off by way of "All on" and "All off" control - Turns all LCD segments off by way of "Display off" control 3. Hardware Requirements See technical manual of the microcontroller on connection between the microcontroller and LCD panel. 4. Behavior 1) All the LCD segments go on by way of normal display control in two seconds after the sample program is executed. 2) All the LCD segments go off by way of normal display control in two seconds. 3) All the LCD segments go on by way of "All on" control in two seconds. 4) All the LCD segments go off by way of "All off" control in two seconds. 5) All the LCD segments go on by way of "All on" control in two seconds. 6) All the LCD segments go off by way of "Display off" control in two seconds. 5. Adjustment This sample software includes GNU17v2.x and GNU17v3.x source code. Before using the sample software, follow instructions below to adjust the sample software either to GNU17v2.x or GNU17v3.x used. 1)Open Import Wizard to import this sample program into workspace. [File] > [Import] > [General] > [Existing Projects into Workspace] 2)Select the folder containing the sample program. For GNU17v2.x, select "s1c17w13_lcd4a_gnu17v2" project. For GNU17v3.x, select "s1c17w13_lcd4a_gnu17v3" project. 3)Check "Copy projects into workspace" and click "Finish" to import. As to configurations on GNU17 in detail, refer to S5U1C17001C Manual. EOF