Product: S1C6F016_S1C63016_008_004_003

Function Overview Application note/ Sample program
Difference of models Document of difference between following models. S1C6F016, S1C63016, S1C63008, S1C63004, S1C63003 rev1.0
SVT17965 Hardware Manual
2014/11/7
Oscillation Circuit Sample program to control the oscillation circuit. The OSC1 and OSC3 operating clocks repeat switching the LCD panel all on and all off ten times. S1C6F016  Application Note/Sample Program
HALT/SLEEP Command Sample program to use the HALT/SLEEP command. It changes the state from HALT to SLEEP.
Watchdog Timer Sample program to use the watchdog timer (WDT). When a watchdog timer non-maskable interrupt (NMI) occurs, the LCD panel is all on. When a key input interrupt occurs, the program disables the watchdog timer and LCD panel is all off.
Clock Timer Sample program to use the clock timer function. It generates a clock timer interrupt every second and switches the LCD panel all on and all off.
Stopwatch Timer Sample program to use the stopwatch timer. The program generates a stopwatch timer interrupt every second and switches the LCD panel all on and all off.
Programmable Timer Sample program to use the programmable timer (PT). It generates a programmable timer interrupt every 0.5 seconds, and switches all-on and all-off displays.
Input/Output Port Sample program to use the ports shared by both inputs and outputs. Inputting P00 to 02 generates a key input interrupt, and inverses P40 to 42 outputs.
Serial Interface
(Master Mode)
Sample program to use serial interface as master mode. It communicates the data with slave mode of serial interface.
Serial Interface
(Slave Mode)
Sample program to use serial interface as slave mode. It communicates the data with master mode of serial interface.
LCD Driver Sample program to use the LCD driver function. It indicates hexadecimal numbers on the LCD panel and changes the panel contrast by key inputs.
Sound Generator Sample program to use the sound generator. The program generates a clock timer interrupt and changes the buzzer frequency from 1170.3 to 4096.0Hz every second.
Integer Multiplier and Divider Sample program to use the integer multiplier and divider function. The program multiplies 13 by 13, divides 2468 by 13, and saves the results to the data RAM.
R/F Converter (DC) Sample program to use the DC-bias R/F converter. The result of the R/F conversion is output to the LCD panel.
R/F Converter (AC) Sample program to use the AC-bias R/F converter. The result of the R/F conversion is output to the LCD panel.
Supply Voltage Detection Circuit Sample program to control the power supply voltage detector (SVD) circuit. The reference voltage is 2.7V. The LCD panel is all on when the voltage is higher than 2.7 V, and all off when lower than 2.7 V.

Product: S1C6F016

Function Description Sample Application
SVT6F016 Sample Application Sample application software provided together with S5U1C6F016T1(SVT6F016T1) to evaluate the S1C6F016 functions.
It can be used to operate LCD display, temperature and humidity measurement, buzzer output, pressure measurement and acceleration measurement.
SVT6F016 sample program

Product: S1C6F632

Function Overview Application note/ Sample program
Clock Timer Sample program to use the clock timer function. It generates a clock timer interrupt every second and switches the LCD panel all on and all off. S1C6F632 Clock Timer Application Note/Sample Program
HALT/SLEEP Command Sample program to use the HALT/SLEEP command. It changes the state from HALT to SLEEP. S1C6F632 HALT/SLEEP Command Application Note/Sample Program
LCD Driver Sample program to use the LCD driver function. It indicates hexadecimal numbers on the LCD panel and changes the panel contrast by key inputs. S1C6F632 LCD Driver Application Note/Sample Program
Integer Multiplier and Divider Sample program to use the integer multiplier and divider function. The program multiplies 13 by 13, divides 2468 by 13, and saves the results to the data RAM. S1C6F632 Integer Multiplier and Divider Application Note/Sample Program
Oscillation Circuit Sample program to control the oscillation circuit. The OSC1 and OSC3 operating clocks repeat switching the LCD panel all on and all off ten times. S1C6F632 Oscillation Circuit Application Note/Sample Program
Input/Output Port Sample program to use the ports shared by both inputs and outputs. Pressing SW1 to 4 generates a key input interrupt, and inverses P50 to 53 outputs. S1C6F632 Input/Output Port Application Note/Sample Program
Programmable Timer Sample program to use the programmable timer (PT). It generates a programmable timer interrupt every 0.5 seconds, and switches all-on and all-off displays. S1C6F632 Programmable Timer Application Note/Sample Program
R/F Converter (AC) Sample program to use the AC-bias R/F converter. The result of the R/F conversion is output to the LCD panel. S1C6F632 R/F Converter (AC) Application Note/Sample Program
R/F Converter (DC) Sample program to use the DC-bias R/F converter. The result of the R/F conversion is output to the LCD panel. S1C6F632 R/F Converter (DC) Application Note/Sample Program
Sound Generator Sample program to use the sound generator. The program generates a clock timer interrupt and changes the buzzer frequency from 1170.3 to 4096.0Hz every second. S1C6F632 Sound Generator Application Note/Sample Program
Supply Voltage Detection Circuit Sample program to control the power supply voltage detector (SVD) circuit. The reference voltage is 2.7V. The LCD panel is all on when the voltage is higher than 2.7 V, and all off when lower than 2.7 V. S1C6F632 Supply Voltage Detection Circuit Application Note/Sample Program
Stopwatch Timer Sample program to use the stopwatch timer. The program generates a stopwatch timer interrupt every second and switches the LCD panel all on and all off. S1C6F632 Stopwatch Timer Application Note/Sample Program
Watchdog Timer Sample program to use the watchdog timer (WDT). When a watchdog timer non-maskable interrupt (NMI) occurs, the LCD panel is all on. When a key input interrupt occurs, the program disables the watchdog timer. S1C6F632 Watchdog Timer Application Note/Sample Program

Product: S1C6F666

Function Overview Application note/ Sample program
Clock Timer This document is a reference material to be consulted when using the clock timer feature of the S1C6F666. S1C6F666 Clock Timer Application Note/Sample Program
Initializing Sample Program This document is a reference material to be consulted when initializing the S1C6F666. S1C6F666 Initializing Sample Program Application Note/Sample Program
LCD Driver This document is a reference material to drive the LCD panel by using the LCD driver feature of the S1C6F666. S1C6F666 LCD Driver Application Note/Sample Program
Arithmetic operation This document has been created as a reference material to use and check the arithmetic feature of the S1C6F666. S1C6F666 Arithmetic operation Application Note/Sample Program
Oscillator Circuit This document is a reference material to be consulted to allow for switching the oscillator circuits of the S1C6F666. S1C6F666 Oscillator Circuit Application Note/Sample Program
Input Ports This document is a reference material to be consulted when using the input ports on the S1C6F666. S1C6F666 Input Ports Application Note/Sample Program
Output Ports This document is a reference material to be consulted when using the output ports on the S1C6F666. S1C6F666 Output Ports Application Note/Sample Program
Programmable Timer (16-bit Timer) This document is a reference material to be consulted when operating the programmable timer with the S1C6F666. S1C6F666 Programmable Timer (16-bit Timer) Application Note/Sample Program
R/f Converter (RFC) This document serves as a reference material to be consulted when using the S1C6F666 to convert sensor resistance on the S5U1C6F666T to a frequency. S1C6F666 R/f Converter (RFC) Application Note/Sample Program
Sound Generator (SG) This document is a reference material to be consulted when using the sound generator with the S1C6F666. S1C6F666 Sound Generator (SG) Application Note/Sample Program
SVD (Supply Voltage Detector) Circuit This document is a reference material to be consulted when using the SVD circuit with the S1C6F666. S1C6F666 SVD (Supply Voltage Detector) Circuit Application Note/Sample Program
Watchdog Timer (WDT) This document is a reference material to be consulted when using the watchdog timer with the S1C6F666. S1C6F666 Watchdog Timer (WDT) Application Note/Sample Program