Display Controllers

Text SizeSmallLarge

FAQ

Inquiry sheet

Please provide all appropriate details on the inquiry sheet provided and send the sheet to a Seiko Epson sales representative.

Inquiry sheet


Q1

How should I terminate the unused input pins?


A

Terminate the pins as indicated below.

CLKI2 Connect to GND via a resistance (3.3kΩ -330kΩ)
TESTEN Connect to GND
GPIO0 to 6 Open, connecting CNF3 to GND


Q2

When I select Generic #1, how should I terminate the BS# pin?


A

Connect the BS# pin to VDD.



Q3

For 16-bit access, do you use the AB0 pin of the lowest address?


A

If only 16-bit accesses are performed (no 8-bit accesses), AB0 does not need to be connected to the host CPU. AB0 should be connected to GND.



Q4

When using a single CPU read signal in Generic #1, should I connect it to RD# or RD/WR#?


A

Connect to both RD# and RD/WR#.
Readouts in byte units are not supported. The signal is read out in word units in all cases.



Q5

The system register has an 8-bit structure. Is 16-bit access possible?


A

Yes. Specify an even-numbered address for 16-bit access.



Q6

When I select Generic #1 or Generic #2, will it cause problems if the timing of the rise of WE1#, WE0#, RD#, and RD/WR# and the timing of the rise of CS# are reversed?


A

Yes, doing so will cause problems.
Set the rise of the CS# at the same timing or later than the rise of WE1#, WE0#, RD#, and RD/WR# to avoid problems.



Q7

What's the address of the built-in SRAM (80KB)?


A

00000h to 13FFFh.



Q8

Is it possible to use a LUT value different from the recommended value?


A

Yes.



Q9

What is the number of colors for LUT?


A

The output of LUT can be 262144 colors, of which only up to 256 may be used at any given time.



Q10

Is it possible to connect S1D13706 to a narrow panel - for example, one with a resolution of 640 × 49 dots?


A

The product operates with narrow panels.
The resolution can be specified in 8-dot increments horizontally and in 1-line increments vertically.



Q11

Do you offer an IBIS model?


A

Refer to the attached documents.

S1D13706 IBIS model ZIP(77KB)



Q12

Do you offer related software or device drivers?


A

Related software and device drivers are available at the URL below.

http://vdc.epson.com/index.php?option=com_docman&task=cat_view&gid=53&Itemid=435 new window



Q14

Please provide a contact address in the event of cases in which the product fails to operate normally.


A

Please contact a Seiko Epson sales representative.

Please provide all appropriate details on the inquiry sheet available through following URL and send the sheet to a Seiko Epson sales representative.

Inquiry sheet



Q14

How much power does this device consume?


A

Power consumption varies with operating conditions. Refer to the reference material provided as follows, which shows power consumption figures under typical operating conditions.

http://vdc.epson.com/index.php?option=com_docman&task=cat_view&gid=53&Itemid=435 new window